š Free Worldwide Shipping on All Orders!Shop Now
1 / 6
+1
Precor Resolute Series Converging Shoulder Press (RSL0515)
The Resoluteā¢ Strength Converging Shoulder Press emphasizes proper biomechanics with an ergonomic, converging axis and independent pressing arm movement. The dual-position handles add to exerciser's comfort and workout variety. The low-profile tower of the Shoulder Press lends an open, spacious feel, even in smaller facilities.
- Designed for ideal joint stabilization under load
- Converging angle designed for proper biomechanics
- Counterbalanced movement arms
[SPECIFICATION]
Equipment Features
| Weight Stack | Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. |
| Upholstery | Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams. |
| Adjustable Seat | Yes, gas-assisted ratcheting seat adjustment |
| Adjustments | Gas -assist ratcheting seat adjustment requires only a lift to release the lever. Adjustment points are highlighted with a contrasting color for easy identification and use. |
| Instructional Placard | Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone. |
| Bearings and Pivot Points | Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. |
| Water Bottle and Accessories Holder | The non-slip drink-and-accessory tray is integrated and features large open, even surface area, easily accessible and easy to keep clean. |
| Pulleys and Cables | Glass-fiber-reinforced nylon pulleys provide strength and durability, while precision ball bearings allow effortless rotation. Cables use a 7x19 stranded wire configuration for added strength and flexibility and are coated with black pressure-extruded nylon for long lasting protection and a smooth feel. 3/16-inch (.48 cm) wire is coated to 1/4 inch (.64 cm) with a breaking strength of 4200 lb (1905 kg) and 1/8 inch (.32 cm) wire is coated to 3/16 inch (.48 cm) with a breaking strength of 2000 lb (907 kg). |
| Frame and Finish | The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process is followed by an electrostatically applied, heat-cured powder coat. |
| Bolt Down Capability | Yes |
| General Features | Natural converging axis allows for more natural motion and greater range of motion. Dual horizontal and neutral handles allow for varying position of the shoulder joint. Arms counterbalance to 10 pound start weight. |
Equipment Specifications
| Standard Shroud Color | Black |
| Incremental Add-on Weight | 5 lb (2.3 kg) |
| Weight Stack | 200 lb / 91 kg |
| Workout Area (L x W) | 61 L x 59 W / 155 L x 150 W |
| Standard Frame Colors | Black Pearl; Gloss Metallic Silver |
| Stocked Upholstery Colors | All Spice, Black, Grey |
| Additional Upholstery Options (Additional lead time applies) | American Beauty, Blue Jay, Burgundy, Deep Clay, Hunter Green, Navy, New Purple, Regal Blue, Slate |
Equipment Dimensions and Weight
| Length | 61 inches / 154 cm |
| Width | 59 inches / 151 cm |
| Height | 60 inches / 153 cm |
| Equipment Weight | 557 lb / 253 kg |
Shipping Dimensions and Weight
| Length | 61 inches / 155 cm |
| Width | 60 inches / 153 cm |
| Height | 65 inches / 165 cm |
| Shipping Weight | 644 lb / 293 kg |
Regulatory
| EN957 | Yes |
| ASTM | Yes |
The Resoluteā¢ Strength Converging Shoulder Press emphasizes proper biomechanics with an ergonomic, converging axis and independent pressing arm movement. The dual-position handles add to exerciser's comfort and workout variety. The low-profile tower of the Shoulder Press lends an open, spacious feel, even in smaller facilities.
- Designed for ideal joint stabilization under load
- Converging angle designed for proper biomechanics
- Counterbalanced movement arms
[SPECIFICATION]
Equipment Features
| Weight Stack | Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. |
| Upholstery | Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams. |
| Adjustable Seat | Yes, gas-assisted ratcheting seat adjustment |
| Adjustments | Gas -assist ratcheting seat adjustment requires only a lift to release the lever. Adjustment points are highlighted with a contrasting color for easy identification and use. |
| Instructional Placard | Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone. |
| Bearings and Pivot Points | Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. |
| Water Bottle and Accessories Holder | The non-slip drink-and-accessory tray is integrated and features large open, even surface area, easily accessible and easy to keep clean. |
| Pulleys and Cables | Glass-fiber-reinforced nylon pulleys provide strength and durability, while precision ball bearings allow effortless rotation. Cables use a 7x19 stranded wire configuration for added strength and flexibility and are coated with black pressure-extruded nylon for long lasting protection and a smooth feel. 3/16-inch (.48 cm) wire is coated to 1/4 inch (.64 cm) with a breaking strength of 4200 lb (1905 kg) and 1/8 inch (.32 cm) wire is coated to 3/16 inch (.48 cm) with a breaking strength of 2000 lb (907 kg). |
| Frame and Finish | The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process is followed by an electrostatically applied, heat-cured powder coat. |
| Bolt Down Capability | Yes |
| General Features | Natural converging axis allows for more natural motion and greater range of motion. Dual horizontal and neutral handles allow for varying position of the shoulder joint. Arms counterbalance to 10 pound start weight. |
Equipment Specifications
| Standard Shroud Color | Black |
| Incremental Add-on Weight | 5 lb (2.3 kg) |
| Weight Stack | 200 lb / 91 kg |
| Workout Area (L x W) | 61 L x 59 W / 155 L x 150 W |
| Standard Frame Colors | Black Pearl; Gloss Metallic Silver |
| Stocked Upholstery Colors | All Spice, Black, Grey |
| Additional Upholstery Options (Additional lead time applies) | American Beauty, Blue Jay, Burgundy, Deep Clay, Hunter Green, Navy, New Purple, Regal Blue, Slate |
Equipment Dimensions and Weight
| Length | 61 inches / 154 cm |
| Width | 59 inches / 151 cm |
| Height | 60 inches / 153 cm |
| Equipment Weight | 557 lb / 253 kg |
Shipping Dimensions and Weight
| Length | 61 inches / 155 cm |
| Width | 60 inches / 153 cm |
| Height | 65 inches / 165 cm |
| Shipping Weight | 644 lb / 293 kg |
Regulatory
| EN957 | Yes |
| ASTM | Yes |
Select Frame | Pad Color
From $2,168.25
Original: $6,195.00
-65%Precor Resolute Series Converging Shoulder Press (RSL0515)ā
$6,195.00
$2,168.25Description
The Resoluteā¢ Strength Converging Shoulder Press emphasizes proper biomechanics with an ergonomic, converging axis and independent pressing arm movement. The dual-position handles add to exerciser's comfort and workout variety. The low-profile tower of the Shoulder Press lends an open, spacious feel, even in smaller facilities.
- Designed for ideal joint stabilization under load
- Converging angle designed for proper biomechanics
- Counterbalanced movement arms
[SPECIFICATION]
Equipment Features
| Weight Stack | Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. |
| Upholstery | Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams. |
| Adjustable Seat | Yes, gas-assisted ratcheting seat adjustment |
| Adjustments | Gas -assist ratcheting seat adjustment requires only a lift to release the lever. Adjustment points are highlighted with a contrasting color for easy identification and use. |
| Instructional Placard | Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone. |
| Bearings and Pivot Points | Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. |
| Water Bottle and Accessories Holder | The non-slip drink-and-accessory tray is integrated and features large open, even surface area, easily accessible and easy to keep clean. |
| Pulleys and Cables | Glass-fiber-reinforced nylon pulleys provide strength and durability, while precision ball bearings allow effortless rotation. Cables use a 7x19 stranded wire configuration for added strength and flexibility and are coated with black pressure-extruded nylon for long lasting protection and a smooth feel. 3/16-inch (.48 cm) wire is coated to 1/4 inch (.64 cm) with a breaking strength of 4200 lb (1905 kg) and 1/8 inch (.32 cm) wire is coated to 3/16 inch (.48 cm) with a breaking strength of 2000 lb (907 kg). |
| Frame and Finish | The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process is followed by an electrostatically applied, heat-cured powder coat. |
| Bolt Down Capability | Yes |
| General Features | Natural converging axis allows for more natural motion and greater range of motion. Dual horizontal and neutral handles allow for varying position of the shoulder joint. Arms counterbalance to 10 pound start weight. |
Equipment Specifications
| Standard Shroud Color | Black |
| Incremental Add-on Weight | 5 lb (2.3 kg) |
| Weight Stack | 200 lb / 91 kg |
| Workout Area (L x W) | 61 L x 59 W / 155 L x 150 W |
| Standard Frame Colors | Black Pearl; Gloss Metallic Silver |
| Stocked Upholstery Colors | All Spice, Black, Grey |
| Additional Upholstery Options (Additional lead time applies) | American Beauty, Blue Jay, Burgundy, Deep Clay, Hunter Green, Navy, New Purple, Regal Blue, Slate |
Equipment Dimensions and Weight
| Length | 61 inches / 154 cm |
| Width | 59 inches / 151 cm |
| Height | 60 inches / 153 cm |
| Equipment Weight | 557 lb / 253 kg |
Shipping Dimensions and Weight
| Length | 61 inches / 155 cm |
| Width | 60 inches / 153 cm |
| Height | 65 inches / 165 cm |
| Shipping Weight | 644 lb / 293 kg |
Regulatory
| EN957 | Yes |
| ASTM | Yes |
